Tesa® 4651 Premium fabric tape 50m black

Tesa® 4651 Premium fabric tape 50m
Farbe: black

tesa^® 4651 is a powerful high quality acrylic coated cloth tape. It is based on a 148 mesh woven rayon fabric backing and a natural rubber adhesive.
tesa^® 4651 is a very strong cloth tape for almost every application.

• Strong adhesive strength, even on rough surfaces
• Excellent tear strength
• Flexible and abrasion resistant
• Weather and waterproof and resistant to ageing
• Easy to write on and easy to tear by hand
• Various sizes (from 9 mm - 100 mm)
• Available in 8 colours (black, white, grey/silver, red, yellow, green, blue, brown)

main applications:

• Colour coding, marking
• Bundling, fastening, taping, reinforcing, tying and fixing
• Sealing of e.g. packaging, cans, sleeves
• Sealing of drill holes, slits, openings, ventilation ducts
• Noise and abrasion protection Base tape on refrigerators and kitchen cabinets

Technical data

• Carrier material acrylate-coated fabric
• Adhesive natural rubber
• Length: 50 m
• Thickness 0.310 mm
• Adhesive strength on steel 3.3 N/cm
• Elongation at break 13
• Tearing force 100 N/cm
• Temperature resistance (30 min.) 130 °C
• Mesh 148 Mesh

Processing and storage information
Surface condition
Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.

Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, separating agents and other impurities:

• Isopropanol/water 50/50
• Heptane or ethanol
• Acetone or MEK
• Suitable other cleaning agents that do not leave any residues and do not attack the substrate.

Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.

Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².

Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.

Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.