PET premium high-performance adhesive tape, double-sided, very strong adhesive, 50m - alternative to Tesa 4965
Color: transparent
The Premium PET adhesive tape is a double-sided adhesive film tape based on a special acrylate adhesive. The double-sided adhesive tape was developed to meet the highest industrial requirements and is ideal for bonding car and truck wing mirrors, plastic parts in the automotive industry, displays, signs, moldings in the furniture industry and self-adhesive EPDM profiles. The PET adhesive tape is characterized by its excellent instant adhesion and shear strength even on rough and low-energy surfaces, good UV, temperature and ageing resistance and it is largely insensitive to chemicals and solvents.
Main applications
- Self-adhesive finishing of plastic and wooden profiles as well as cable ducts.
- Automotive industry e.g. for bonding side mirrors
- For bonding battery packs in cell phones
- For bonding heavy decorative items and displays.
- Bonding scales, panels and signs.
- Attachment and continuous bonding of plastic, metal, paper and film webs.
- Foam and felt bonding
- For assembly of ABS parts in the automotive industry.
- For self-adhesive finishing of rubber and EPDM profiles.
- Bonding moldings in the furniture industry.
- Sealing of insulating pipe shells.
- Bonding convertible tops.
Properties:
- Elongation at break: 50%
- Adhesive: modified acrylate
- Type of cover: PP film
- Color of the cover: red
- Thickness: 200 µm
- Backing material: PET film
- Color: transparent
- Adhesive strength on steel >20 N/25mm
- Temperature resistance -30°C to +120°C
Processing and storage information
Surface condition
The surfaces must be dry, free of dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, release agents and other impurities:
Isopropanol/water 50/50
Heptane or ethanol
Acetone or MEK
Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.
