Tesa 60404 Premium packaging tape - previously Tesa 4104
Colour: red
tesa® 60404 is a premium packaging tape based on a s-PVC carrier and a natural rubber adhesive compound. It features excellent adhesive performance on all types of cardboard and ensures a secure seal. The natural rubber adhesive achieves best results in a wide range of applications and substrates.
- Sealing of small boxes (cardboard or plastic)
- Sealing of tins and bags
- Ideal for markings, e.g. on pipelines
- tesa® 60404 enables clean, sharp paint edges and is excellent for painting processes
Technical properties:
- Elongation at break: 90
- Adhesive mass: natural rubber
- Tearing force: 43 N/cm
- Thickness: 67 µm
- Carrier material: PVC film
- Adhesive strength on steel: 3.6 N/cm
Processing and storage instructions
- Surface condition
- Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, separating agents and other impurities:
- Isopropanol/water 50/50
- Heptane or ethanol
- Acetone or MEK
- Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.