Custom printed PP packing tape in 44mµ thick, white, brown or transparent 50mm x 66m

PP adhesive tape in 50mm x 66m printed with your text

Colour: white, brown or transparent
Thickness: 44mµ

Professional adhesive tape, individually printed with your logo or text. The article included in the offer serves as an example. Of course, other dimensions, colours, different adhesives and running metres per roll etc. are also possible. Please send us your request and we will send you a customised offer.

Our PP packing tape in 44mµ is the inexpensive solution for safe and quick packing of your packaging with your own brand. It has a good processing performance and is noiseless.


high tear strength
high adhesive strength
noiseless unwinding
user-friendly handling

Product properties
Carrier: PP
Adhesive: choice of hotmelt or acrylate 
Print 1-6 colours
Length: 66 m
Roll width: 50mm
Thickness: 0,44 mm
Inner core diameter: Ø 76cm

Possible applications
Packing tape for light and medium weight cardboard boxes
Strapping tape
 

Processing and storage instructions
Surface condition
Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.

Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, release agents and other impurities:
- Isopropanol/water 50/50
- Heptane or ethanol
- Acetone or MEK
- Suitable other cleaning agents that do not leave any residues and do not attack the substrate.

Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.

Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².

Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.

Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.