PP Tape Premium 48mm x 66m
transparent
Thickness: 46µm
The Premium PP packaging tape is a universally applicable packaging tape made of polypropylene with a single-sided, water-dissolved acrylate adhesive. This PP adhesive tape can be used wherever ageing and UV stability is required for corrugated cardboard packaging. Due to its special adhesive, it is essential that the PP Pack-Film is firmly pressed down during processing.
- Stable, German premium version
- very good adhesive strength
- easy to unroll
- very friendly handling
- made in Germany
Product features
- backing: PP (polypropylene)
- adhesive: modified acrylate (solvent-free)
- length: 66 m
- Roll width: 48mm
- Thickness: 46µm
- Tear strength: 75 N/25 mm (+/- 10 %)
- Adhesion to steel: 5 N/25 mm (+/- 10 %)
- Elongation at break: 170 % (+/- 10 %)
- Temperature resistance: up to + 60 degrees Celsius
- Core: Ø 76cm / 3 inch
Possible applications
- Packing tape for small and medium weight cardboard boxes
Processing and storage instructions
Surface condition
Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, release agents and other impurities:
Isopropanol/water 50/50
Heptane or ethanol
Acetone or MEK
Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.
