Paper fleece adhesive tape 130 µm, double-sided adhesive 50m
Colour: transparent
The paper fleece tape has very good processing and punching properties. It is very suitable for self-adhesive finishing of various elements. The tape has a high initial tack and can be used on many high energy surfaces. The paper fleece is also excellent for self-adhesive finishing of foams.
- thin double-sided paper fleece adhesive tape
- strong/strong adhesion
- well suited for paper, cardboard, fabric, glass/ceramics and for sealing poly bags
- high initial tack and shear strength
- very good adhesion to many high and low energy surfaces
- good plasticiser and UV resistance
- Time saving due to easy handling
Recommended applications:
- suitable for metals, painted surfaces, paper, cardboard and wood
- Self-adhesive finishing of sealing profiles, furniture strips and cable ducts
- Fixing of advertising materials such as displays, posters etc.
- for punched parts
- Joining, mounting, holding, laminating, fastening
Technical data:
- Thickness: 130 µm
- Carrier: paper fleece
- Carrier colour: Translucent
- Cover material: silicone paper
- Cover colour: white
- Adhesive: Solvent acrylic
- Adhesive strength: 15 N/25 mm PSTC-1/ASTM D3330
- Temperature range: from -20°C to +120°C
Processing and storage information
Surface condition
The surfaces must be dry, free of dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, release agents and other impurities:
Isopropanol/water 50/50
Heptane or ethanol
Acetone or MEK
Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.
