3M 9088 PET Universal Foil Tape 50m
The double-sided 3M™ 9088 high performance adhesive tape is versatile. The all-purpose tape is an all-rounder and for a wide range of applications. From signage to automotive, electronics to appliance manufacturing, you can trust 3M to strengthen and protect your brand. Versatile 3M™ Double-Sided High Performance Tape 9088 - the multi-purpose tape you've been waiting for. This tape provides durable bonds, has high tack and shear strength and is resistant to UV radiation, chemicals and high temperatures. Its long-term high tack makes it an excellent choice for POP/POS displays, light boxes, signage, metal fabrication applications, room decorations as well as for bonding paper, packaging and much more. High tack and sustainability.
The innovative pressure sensitive adhesive used in 3M™ 9088 is ideal for bonding low and high surface energy materials. At the same time, we are meeting our commitment to reduce VOC emissions. We achieve this combination of high performance and sustainability through a solvent-free adhesive coating process that is good for the environment, the application and your wallet alike.
- Double-sided adhesive tape with polyester backing
- Suitable for many high and low energy surfaces
- Universally applicable
- High UV and temperature resistance for outdoor applications
- Excellent transparency and therefore suitable for POP/POS displays
- High peel strength on many surfaces
- Very uniform and homogeneous coating appearance opens up many application possibilities
Recommended applications:
- For mounting and fixing sales displays and advertising boards
- For fixing and fastening decorative strips and emblems
- For sealing profiles and cable ducts
- For fabric and leather seams
- For blind manufacturers
- For splicing
Technical data:
- Thickness: 200 my
- Carrier: PET film 0.012 mm, transparent
- Adhesive: acrylate
- Protective cover: Glassine paper, white (94 g/m²), thickness: 0.080 mm
Processing and storage information
Surface condition
The surfaces must be dry, free of dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, release agents and other impurities:
- Isopropanol/water 50/50
- Heptane or ethanol
- Acetone or MEK
- Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.
