3M 9087 PVC - Foil Tape 50m
The high performance 3M™ double-sided high performance tape 9087 is a 260 µm thick white double-sided tape from the 375 adhesive series, featuring a 38 µm thick PVC backing and a white protective paper with a green 3M logo. Adhere smooth, rough or textured surfaces with 3M™ high performance double-sided tape 9087, which features high tack and instant adhesion. The product is coated with a 375 series adhesive, is solvent resistant and has a PVC backing. The white adhesive tape is on a white protective paper with the green 3M logo.
Thin double-sided tape with PVC backing
High initial tack
UV resistant
For high and low energy surfaces (e.g. PE, PP)
Universally applicable on many substrates
Recommended applications:
For mounting and fixing sales displays, samples and advertising boards.
For fixing and fastening decorative strips and emblems
For sealing profiles and fixing cable ducts
For fabric and leather seams
For blind manufacturers
For splicing
Protective paper for punched parts
Technical data:
Thickness: 260 my
Carrier liner: PVC film 0.038 mm, transparent
Adhesive: modified acrylic adhesive
Peel force: 155 N/100mm
Temperature resistant: permanently 70°C/ briefly 85°C
Solvent resistant: good
Moisture resistant: good
Resistant to plasticisers: good
UV resistance: very good
Processing and storage information
Surface condition
The surfaces must be dry, free of dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, release agents and other impurities:
Isopropanol/water 50/50
Heptane or ethanol
Acetone or MEK
Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.
