Warning Tape Please keep distance Adhesive tape 50mm x 66m

Warning Tape Please keep distance Adhesive tape 50mm x 66m
Colour: white-red-black
Quantity: 1 roll

Our floor marking tape is ideal for protecting your customers from infection and thus curbing the spread of the pandemic. Prescribed hygiene measures can thus be adhered to without any problems. The tape can be applied with scissors or a standard packaging tape dispenser (not included in the price). The Please keep your distance warning tape is hard-wearing and ideally suited as a floor marking. Also suitable for high-traffic areas with walk-in customers, for sales rooms, in retail, for banks, doctors' surgeries, hygiene and food shops.

• adhesive on one side
• extremely tear resistant
• high UV and ageing resistance
• low-noise unrolling
• Please keep your distance - Print
• ideal for pandemic protection
• very good visibility due to eye-catching colours
• for affixing to floors, walls, etc.

Technical data:

• Width per roll: 50 mm
• Length per roll: 66m
• Core diameter: 76 mm (standard)
• Film thickness: 150 my (+/- 5%)
• PVC adhesive tape
• Elongation at break: 100

Processing and storage instructions
Surface condition
Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.

Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, separating agents and other impurities:
- Isopropanol/water 50/50
- Heptane or ethanol
- Acetone or MEK
- Suitable other cleaning agents that do not leave any residues and do not attack the substrate.

Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.

Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².

Storage
The rolls should be stored in their packaging protected from light at a temperature between +15°C and +25°C and a relative humidity of 50%.

Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. The suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.