Tesa 51965 Tesafix double-sided black polyester adhesive tape
Colour: black
tesa 51965 is a double-sided black polyester adhesive tape with acrylic adhesive. It is covered with a Tesa logo printed paper cover. Tesa 51965 features good adhesion to various plastics such as ABS and even EPDM, as it is highly resistant to plasticisers. Tesa 51965 offers high bonding strength even at high temperatures.
Product properties
- Carrier: paper backing
- Adhesive: modified acrylate
- Length: 50 m
- Thickness: 0.205 mm
- Adhesive strength (on steel): 11.8 N / cm
- Tearing force: 20 N / cm
- Elongation at break: 50
- Temperature resistance: up to 100°C (short term 200°C)
- Colour: black
Application and possible uses
- For mounting ABS parts in the automotive industry.
- For self-adhesive finishing of rubber and EPDM profiles.
- Bonding of mouldings in the furniture industry.
- Sealing of insulating pipe shells.
- Display (e.g. for mobile phones) and sign bonding.
- Finishing of lead profiles.
- Convertible top bonding.
- Continuous bonding of aluminium sheets.
Processing and storage instructions:
Surface condition
Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, separating agents and other impurities:
Isopropanol/water 50/50
Heptane or ethanol
Acetone or MEK
Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. Suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.