3M™ 501E High Temperature Industrial Masking Tape 72mm x 50m
packaging unit: 12 rolls
Colour: chamois
- Can withstand medium temperature bake ovens up to + 160°C/1h
- Resists high temperatures for indoor use
- The most powerful paperback masking tape
- Adapts perfectly to irregular surfaces
- Enables highly accurate paint finishes
3M™ High Temperature Industrial Masking Tape 501E is a buff-colored crepe paper tape coated with a 0.150 mm thick rubber adhesive.
Designed for critical paint masking applications in the automotive, specialty vehicle, and industrial markets where excellent holding and high-temperature performance are required.
Suggested applications
- High-performance industrial and automotive paint masking
- Suitable for infrared/UV-curing and bake cycles
- Oven-drying systems, IR or heat lamps
Details Adhesive
- Type Rubber
- Applications Paint Masking, Premium Masking
- Backing (Carrier) Material Crepe Paper
- Brands 3M™ Product
- Colour Beige
Processing and storage instructions:
Surface condition
Surfaces must be dry, free from dust, oil, oxides, release agents and other contaminants.
Surface cleaning
The following cleaning agents, for example, can be used to remove dust, oil, separating agents and other impurities:
Isopropanol/water 50/50
Heptane or ethanol
Acetone or MEK
Suitable other cleaning agents that do not leave any residues and do not attack the substrate.
Temperature
The most favourable processing temperature (object and ambient temperature) is between +15°C and +25°C.
Pressure
The strength of the bond is directly dependent on the contact that the adhesive has with the surfaces to be bonded. A short, high pressure (e.g. with a squeegee, pressure roller or pressure device, etc.) ensures good surface contact. The type and amount of pressure depends on the material (thin- or thick-walled, etc.) and the geometry of the components. Rule of thumb: approx. 20 N/cm².
Note
The technical information is given to the best of our knowledge, but is not binding. The information only has the character of a general recommendation. Suitability of the product for the desired purpose must be ensured by own tests under the original conditions. A legal assurance of certain properties cannot be derived from our information.
